防火卷簾門的面積核算方式及裝置要求

Calculation method and installation requirements for the area of fireproof rolling shutter doors

1、操控系統滿意一般鋼質復合卷簾的操控要求。

1. The control system is satisfied with the control requirements of general steel composite roller blinds.

2、缺相主動維護功用。防火卷簾門

2. Proactive maintenance function for phase deficiency. Fireproof rolling shutter door

3、無需噴淋維護，下降了消防水源的用量。

3. No need for sprinkler maintenance, reducing the usage of fire water sources.

4、具有電源進線相序主動檢測。

4. It has active detection of power input phase sequence.

5、提供給消防操控中心門位狀況信號。

5. Provide door position status signals to the fire control center.

6、質輕、卷曲功用好，占用空間小，啟閉靈敏，噪音小，系數更長處。

6. Lightweight, good curling function, small space occupation, sensitive opening and closing, low noise, and higher safety factor.

7、選用雙軌雙簾結構規劃、簾面選用多層無機耐火隔熱資料構成，具有優異的防煙、防火功用，經1200℃耐火試驗背火面均勻溫升不超越140℃， 高溫升不超越180℃，。

7. The double track double curtain structure is selected for planning, and the curtain surface is composed of multiple layers of inorganic fire-resistant and heat-insulating materials, which have excellent smoke and fire prevention functions. After 1200 ℃ fire resistance test, the uniform temperature rise of the back fire surface does not exceed 140 ℃, and the high temperature rise does not exceed 180 ℃,.

8、抗拉強度大，抗腐蝕、濕潤功用強。

8. High tensile strength, strong corrosion resistance and moisture resistance.

防火卷簾門裝置要求及面積核算

Requirements and area calculation for fireproof rolling shutter door installation

一、防火卷簾門裝置要求：

1、 Requirements for the installation of fireproof rolling shutter doors:

1、卷簾門裝置好后，裝置吊頂，吊頂邊緣應離簾板50mm，避免磨擦；

1. After the installation of the rolling shutter door, the suspended ceiling should be installed, and the edge of the suspended ceiling should be 50mm away from the curtain board to avoid friction;

2、裝置卷簾門的洞口上部不得設有通風管、水管等；

2. The upper part of the opening of the rolling shutter door shall not be equipped with ventilation pipes, water pipes, etc;

3、電源線路(三相五線和消防中控信號線)由用戶鋪設到卷門機旁的電氣操控箱邊；

3. The power lines (three-phase five wire and fire control signal line) are laid by the user to the electrical control box next to the rolling door machine;

4、依據消防管理

4. According to fire management

5、調試及運用時，禁止底部站人。電器設備不得私行拆搬。

5. During debugging and application, it is prohibited to stand at the bottom. Electrical equipment shall not be dismantled or moved privately.