電動卷簾門的布線是可以自己動手完成的，在這里，濟南富強門業給大家介紹一下，關于電動卷簾門布線的問題。

The wiring of electric rolling shutter door can be completed by oneself. Here, Jinan Fuqiang door industry will introduce the wiring of electric rolling shutter door.

1、如果是選擇只用遙控控制(就像空調、電視等的遙控一樣)如果只需要遙控控制，那么你就只需要讓電工在你的窗簾盒里或者就在你的窗簾安裝面附近留一個電位并裝上插座(就象預留空調插座一樣)——不過要注意的是這個電位要求底盒是用“86型號”的(非國標的那種外置塑料底盒，相對比普通家用的鐵底盒大一點點的)。

1. If you choose to use remote control only (just like the remote control of air conditioner, TV, etc.), if you only need remote control, then you just need to ask the electrician to leave a potential in your curtain box or near the installation surface of your curtain and install the socket (just like reserving the air conditioner socket) - but it should be noted that this potential requires the bottom box to use "86 model" (non national standard) That kind of external plastic bottom box is a little bigger than the ordinary household iron bottom box).

2、如果是選擇既有遙控又有手控面板控制(就像電燈開關面板一樣)既有遙控又要手控面板，那么就讓電工給你在墻上你覺得合適美觀的地方開出一個電位——注意使用的底盒要求如上。另外從你裝底盒的位置再引一條三芯線(單軌道一根，雙軌道要求兩根。)注意：每條電動卷簾門軌道電機必須是接一條三芯線，兩條軌道的電機零線不可以共用!

2. If you choose to have both remote control and manual control panel (just like the light switch panel) and both remote control and manual control panel, then let the electrician give you a potential on the wall where you think it is suitable and beautiful - pay attention to the bottom box requirements as above. In addition, lead a three core wire from the position where you install the bottom box (one for single track, two for double track). ）Note: each electric roller shutter track motor must be connected with a three core wire, and the motor zero line of the two tracks cannot be shared!

注意：以上的方法就是安裝電動卷簾門前期的布線工作，不過需要提醒的是，以上所提到的預留電位位置是需要保證隨時可以通電的。

Note: the above method is the wiring work in the early stage of installing the electric rolling shutter door, but it needs to be reminded that the reserved potential position mentioned above needs to ensure that it can be powered on at any time.

布線就是這么簡單，于控制器怎么接線、如何通電?產品上面有注明，只要接好后把原來布線時預留的插座或開關拆除把控制器放進去裝牢就可以了。

Wiring is so simple. As for how to wire and power on the controller, it is indicated on the product. As long as the socket or switch reserved for wiring is removed and the controller is put in and installed firmly.