安裝防火卷簾門是在很多商鋪以及工廠的選擇，一方面能提高性能，另一方面還具有防火的作用。防火卷簾門在使用的過程中可能會出現脫軌的情況，那么防火卷簾門脫軌了怎么復原呢？濟南卷簾門廠家為您講解。

Installing fireproof rolling shutter doors is the choice of many shops and factories. On the one hand, it can improve the safety performance, on the other hand, it also has the function of fire prevention. The fire shutter door may be derailed in the process of use, so how to restore the fire shutter door when it is derailed? Jinan roller shutter door manufacturer will explain to you.

卷簾門上下推拉需要在導軌里實現的，一旦脫軌就會出現卡殼，容易出現上去下不來或者能下卻不能上的情況，這時用工具掰開滑槽，拆下定位塊，把門重新復位裝好或者把導軌移動到合適的位置再重新打孔鑲接膨脹螺絲。如果還是不行，建議找相應的人士或廠家進行維修。

The roller shutter door needs to be pushed and pulled up and down in the guide rail. Once it is derailed, it will get stuck. It is easy to get up and down or can't get up and down. At this time, use a tool to break the chute, remove the positioning block, reset the door, or move the guide rail to the appropriate position, and then re-punch and insert the expansion screw. If it still fails, it is recommended to find the corresponding professional or manufacturer for maintenance.

防火卷簾門脫軌了，要先調整好軌道，同時安裝牢固好五金配件，不要出現松動的情況，并讓防火卷簾門回位。重新調整簾片，使兩邊簾片相互平行，后用潤滑油擦拭各連接部位，減少摩擦。然后拉動防火卷簾門，如果順暢無阻的話，那就說明已經復原了。

If the fire shutter door is derailed, the track should be adjusted first, and the hardware fittings should be installed firmly without loosening, and the fire shutter door should be returned. Re-adjust the curtain pieces so that the curtain pieces on both sides are parallel to each other, and then wipe the connecting parts with lubricating oil to reduce friction. Then pull the fire shutter door. If it is smooth, it means it has been restored.

防火卷簾門脫軌了怎么還原？以上就是問題的相關解答內容了，您有啥想咨詢的問題就來我們網站http://www.wurkt.com看看吧！

How to restore the fire shutter door when it is derailed? The above is the relevant answers to the questions. If you have any questions, please come to our website http://www.wurkt.com Look!