The electric roller shutter door is easy to operate and use, and is regarded as a high-tech product. Therefore, many users will ignore the safety precautions of the electric roller shutter door, which leads to the existence of security risks.

　　所以在實際操作中，還是要注意一些電動卷簾門的使用和保護事項。電動卷簾門是一種卷簾門，選用電動驅動，簡單靈敏。用于倉庫、等場所。

　　So in the actual operation, we still need to pay attention to the use and protection of some electric roller shutter doors. Electric roller shutter is a kind of roller shutter, which is driven by electric motor, simple and sensitive. Used in warehouses, shopping malls and other places.

　　卷簾門圖案生銹

　　Rusty design of rolling shutter door

　　1、當卷簾門放下時要知道長度與地面的距離不應大于50mm。

　　1. When the roller shutter is put down, the distance between the time limit length and the ground shall not be greater than 50mm.

　　2、對卷簾門的金屬部件要注意保護和保養，防止生銹或腐蝕現象。

　　2. Pay attention to the protection and maintenance of the metal parts of the rolling shutter door to prevent rust or corrosion.

　　3,有必要防火卷簾門的設備上一邊設備,安排的低端的包可能需要建立一個可移動可移動蓋板在天花板上,下端有必要離開500毫米邊長的可拆卸維修孔,維修和維護。

　　3. It is necessary to install the equipment on the upper side of the fire-proof rolling shutter door. The low-end package may need to build a movable cover plate on the ceiling. The lower end needs to leave the removable maintenance hole with a side length of 500mm for maintenance.

　　4、有必要將梁座上端與卷簾門底部的軸承保持少200mm的距離，以保證當制動器停止時不發生車頂的現象。

　　4. It is necessary to keep a distance of at least 200 mm between the upper end of the beam seat and the bearing at the bottom of the roller shutter door to ensure that the roof will not occur when the brake stops.

　　5、卷簾門使用前的檢查和理解其工作的方向,長度和方向的極限高度的門,也不容易損害限制裝置,以防止反向滾動到頂部的形成和其他損失。

　　5. The roller shutter door shall be inspected before use and the door which understands the working direction, length and ultimate height of the direction shall not easily damage the limiting device to prevent the formation of reverse rolling to the top and other losses.

　　6、當卷簾門工作時若有較大的顫動可能是運動異常時，建議立即停止檢查，并檢查是否有雜物妨礙工作。

　　6. When the rolling shutter door works, if there is a large vibration which may be caused by abnormal movement, it is recommended to stop the inspection immediately and check whether there are sundries hindering the work.

　　7. 建議每年檢查卷揚機三次，以保證工作質量。

　　7. It is recommended to check the winch three times a year to ensure the work quality.

　　8、卷簾門操作時，操作者要站在卷簾門工作的方位位置進行操作，防止意外損壞。

　　8. When operating the rolling shutter door, the operator shall stand at the working position of the rolling shutter door to prevent accidental damage.

　　以上就是濟南卷簾門廠小編與您分享的關于卷簾門防銹或腐蝕的知識，希望能對您有所幫助。

　　The above is the knowledge about anti rust or corrosion that Jinan roller shutter factory has shared with you. I hope it can help you.