驅動電機：快門選用制動減速電機，制動速度快，噪音低。一般來說，市面上賣的快門電機，制動效果欠好或許制動噪音大，不適合運用。速比為1: 10-1: 15。這是一種新的操控形式。當操作中止時，它不會。#039;t不需求依靠剎車來剎車，干聲進一步降低了底。百葉窗的電機要定期查看，看有無毛病，毛病要及時修理，防止嚴重毛病。

Drive motor: The shutter adopts a braking and deceleration motor, which has fast braking speed and low noise. Generally speaking, shutter motors sold on the market may have poor braking performance or high braking noise, making them unsuitable for use. The speed ratio is from 1:10 to 1:15. This is a new form of control. When the operation is aborted, it will not# 039; T does not need to rely on brakes to brake, which further reduces the dry noise. The motor of the blinds should be checked regularly to see if there are any problems, and the problems should be repaired in a timely manner to prevent serious problems.

今天，邊肖將告知你查看和維護快門電機的注意事項：

Today, Bian Xiao will inform you of the precautions for checking and maintaining the shutter motor:

1.只能依據當時備件清單運用原裝備件；

1. Original spare parts can only be used based on the current spare parts list;

2.替換制動線圈時，應同時替換快門的制動操控裝置；

When replacing the brake coil, the brake control device of the shutter should be replaced at the same time;

3.電機在工作過程中溫度可能會變得很高，有燙傷的風險；

3. The temperature of the motor may become very high during operation, which poses a risk of burns;

4.緊固或降低升降驅動裝置(有墜落的風險)；

4. Tighten or lower the lifting drive device (there is a risk of falling);

時刻距離:當用作工作制動器時，查看每個3000工作少一次，首要查看快速門制動器丈量摩擦片的厚度.丈量和調整工作氣隙.壓板.花鍵套.嚙合和中止推環；

Time distance: When used as a work brake, check at least once for every 3000 operations. First, check the thickness of the friction plate of the quick door brake, measure and adjust the working air gap, pressure plate, spline sleeve, engagement and stop push ring;

本文由濟南卷簾門友情奉獻.更多有關的知識請點擊:http://www.wurkt.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated by Jinan Roller Shutter Door. For more information, please click: http://www.wurkt.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned